Netgear Nighthawk extenders are popular worldwide for their groundbreaking networking performance. But, there are times when the device does not connect to the internet. In this case, the user is most likely to see an error message on client device saying Nighthawk login timed out during the home network management process. To prevent you from meeting that fate, we have penned down this post. Here, we will let you know about the reasons why the Netgear Nighthawk is not connecting to the internet. Don’t worry! We will also share the relevant troubleshooting techniques to fix the problem. Read on.
Before All Else – Check the Router-Extender Connection
What is the internet source for your Netgear Nighthawk range extender? It is the router. Therefore, there should be a proper connection between both devices. What is the connection source between them? Wired? If yes, then you should immediately run an eye scan over the cable. If it is found damaged, then you are advised to get the cable replaced right out the gate. After all, we cannot expect a damaged Ethernet cable to facilitate you with a sound internet connection. However, do keep in mind that the Ethernet connection needs to be finger-tight. Else, there will be a patchy internet connection on your devices.
Just in case you are a user who doesn’t the mess of wires, then you would have connected your Netgear Nighthawk extender and router using a wireless source. Know that when the devices are connected wirelessly, they need to share a suitable distance. If you keep them too far, they will face issues communicating wth each other. On the other hand, if these devices are placed too close, there are chances that their signals will clash. Thus, to avoid both possibilities, keep the distance optimal.
Solutions: Netgear Nighthawk Not Connecting to Internet
If even after performing a necessary workaround on the extender-router connection, your extender is unable to connect to the internet, you should follow the techniques mentioned below:
1. Restart the Extender
Technical glitches somehow can be a responsible factor behind the issue you are facing. Know that when the extender becomes a victim to technical glitches, it is likely to give you issues like the one in the discussion. To get rid of these glitches, you should take a simple step of restarting the range extender. Simply, follow the steps mentioned here:
- Disconnect your Netgear Nighthawk from the main router.
- Now, power down the extender and place it idle.
- The idleness time should be at least 10 minutes.
- Power up the extender and connect it back to the router.
2. Ensure Proper Power Supply
Can you expect your Netgear Nighthawk to get connected to the internet if it is not properly powered up? Of course not! Accessing the internet will come secondary but you won’t even be able to see the network name Netgear_ext on the network list of your devices. Thus, we suggest you to check if your extender is getting stable electricity or not.
For this, look at the wall socket into which you have plugged your Netgear Nighthawk WiFi extender. Is it damaged or short-circuited? If yes, then you have to connect your extender to another but a working power socket. This must be known to you that the power requirements of your Netgear extender may also not get fulfilled if there are power issues from the backend. Thus, ensure using a UPS.
The Concluding Thought
The Netgear Nighthawk not connecting to internet issue can halt the internet access on connected devices. Are you able to connect your extender to the internet now? If yes then congratulations. Otherwise, consider reducing the network traffic on your extender and relocating it. It will surely help you out.